Component Function Check

ASCD BRAKE SWITCH


Component Function Check

Regarding Wiring Diagram information, Electrical Diagrams.
1.CHECK ASCD BRAKE SWITCH FUNCTION
With CONSULT-III
1. Turn ignition switch ON.
2. Select "BRAKE SW1" in "DATA MONITOR" mode with CONSULT-III.
3. Check "BRAKE SW1" indication under the following conditions.





Without CONSULT-III
1. Turn ignition switch ON.





2. Check the voltage between ECM harness connectors.





Is the inspection result normal?
YES - INSPECTION END
NO - Go to Diagnosis Procedure.