High-Pressure Flexible Hose

COOLER PIPE AND HOSE


HIGH-PRESSURE FLEXIBLE HOSE

HIGH-PRESSURE FLEXIBLE HOSE : Removal and Installation for High-Pressure Flexible Hose


REMOVAL
1. Partially drain the engine cooling system. Changing Engine Coolant.
2. Disconnect the battery negative and positive terminals.
3. Remove the engine room cover.
4. Remove the air cleaner assembly and air ducts. Service and Repair.
5. Remove the upper radiator hose.
6. Remove the battery and battery tray. Removal And Installation (Battery Tray).
7. Discharge the refrigerant. Service and Repair.
8. Remove the engine cooling fan and shroud assembly. Removal And Installation.
9. Disconnect the high-pressure flexible hose from the compressor and the high-pressure pipe and junction pipe.

CAUTION:
Cap or wrap the joint of the hose with suitable material such as vinyl tape to avoid the entry of any contaminants.
10. Remove the high-pressure flexible hose.

INSTALLATION
Installation is in the reverse order of removal.

CAUTION:
- Replace the O-rings with new ones, then apply compressor oil to them for installation.
- After charging the refrigerant, check for leaks. Checking Of Refrigerant Leaks.