High-Pressure Pipe

COOLER PIPE AND HOSE

HIGH-PRESSURE PIPE

HIGH-PRESSURE PIPE : Removal and Installation for High-Pressure Pipe

REMOVAL
1. Discharge the refrigerant. Service and Repair.
2. Remove the RH and LH hoodledge covers.
3. Remove the strut tower bar. Exploded View.
4. Remove the upper cowl. Removal And Installation.
5. Remove the lower RH cowl.
6. Reposition the engine coolant reservoir out of the way without disconnecting the hose.
7. Reposition the power steering reservoir out of the way without disconnecting the hose.
8. Disconnect the power steering hose clamp to reposition the power steering hose out of the way without disconnecting the hose.
9. Remove the torque rod. Removal and Replacement.
10. Disconnect the harness bracket from the engine cover.
11. Disconnect the high-pressure pipe from the expansion valve and the high-pressure flexible hose and junction pipe.

CAUTION:
Cap or wrap the joint of the pipe with a suitable material such as vinyl tape to avoid the entry of contaminants.
12. Remove the high-pressure pipe.

INSTALLATION
Installation is in the reverse order of removal.

CAUTION:
- Replace the O-rings with new ones, then apply compressor oil to them for installation.
- After charging the refrigerant, check for leaks. Checking Of Refrigerant Leaks.