Front & Rear Window Anti-Pinch
FRONT POWER WINDOW SWITCH
Removal and Installation
REMOVAL
1. Using a suitable tool, remove the front door grip cover. Exploded View.
2. Remove the front power window switch locking clip (A).
3. Using a suitable tool, release the metal clip and lift the front power window switch and finisher as an assembly upward to remove it from the front door finisher.
Broken Square : Metal clip
Broken Circle : Pawl
CAUTION:
Wrap a cloth around suitable tools to protect components from damage.
4. Disconnect the harness connector.
5. Release the pawls on each side, then separate the switch finisher (1) from the front power window switch (2) and remove.
CAUTION:
Do not fold the pawl of front power window switch finisher.
INSTALLATION
Installation is in the reverse order of removal.
NOTE:
After every switch harness disconnection, it is necessary to perform the Initialization procedure Special Repair Requirement.