Front And Rear Window Anti-Pinch

POWER WINDOW MAIN SWITCH


Removal and Installation


REMOVAL
1. Remove the front door grip cover. Exploded View.





2. Remove the power window main switch locking clip (A).





3. Using a suitable tool, release the metal clip and lift the power window main switch and finisher as an assembly upward to remove it from the front door finisher.
Broken Square : Metal clip
Broken Circle : Pawl
4. Disconnect the harness connector.
5. Release the pawls on each side, then separate the switch finisher (1) from the power window main switch (2) and remove.

CAUTION:
Do not fold the pawl of power window main switch finisher.

INSTALLATION
Installation is in the reverse order of removal.

NOTE:
After every switch harness disconnection, it is necessary to perform the initialization procedure. Special Repair Requirement.