Key Slot

KEY SLOT


Diagnosis Procedure

Regarding Wiring Diagram information, Intelligent Key System/Engine Start Function or NVIS.
1.CHECK KEY SLOT POWER SUPPLY CIRCUIT
1. Turn ignition switch OFF.
2. Disconnect key slot connector.





3. Check voltage between slot harness connector M40 terminal 1, 5 and ground.





Is the inspection result normal?
YES - GO TO 2
NO - Repair or replace key slot power supply circuit.
2.CHECK KEY SLOT GROUND CIRCUIT





Check continuity between key slot harness connector M40 terminal 7 and ground.





Is the inspection result normal?
YES - GO TO 3
NO - Repair or replace key slot ground circuit.
3.CHECK INTERMITTENT INCIDENT
Intermittent Incident.
- Inspection End.