Front Stabilizer

FRONT STABILIZER


Removal and Installation


REMOVAL
1. Remove steering gear and linkage. Removal And Installation.





2. Remove nuts on upper portion of stabilizer connecting rod.
3. Remove stabilizer clamp bolts.
4. Remove stabilizer from the vehicle.

INSPECTION AFTER REMOVAL
Check stabilizer, connecting rod, bushing and clamp for deformation, cracks and damage, and replace if necessary.

INSTALLATION
Installation is in the reverse order of removal. Exploded View.





- When installing stabilizer, make sure that notch (A) in stabilizer clips face front.
- Make sure the slit (B) in surface of stabilizer bushings face rear.
- Arrow Indicates : Front.





- Stabilizer uses pillow ball type connecting rod. Position ball joint with case on pillow ball head parallel to stabilizer.