Removal And Installation

AIR BREATHER HOSE


Removal and Installation


REMOVAL
1. Remove air duct (inlet). Service and Repair.
2. Remove air cleaner case. Service and Repair.
3. Remove air breather hose from transaxle assembly.

INSTALLATION
Installation is in the reverse order of removal.

CAUTION:
- Install air breather hose with paint mark facing front.
- Insert air breather hose onto air breather tube until overlap area reaches the spool.
- Install air breather hose to heater pipe and air cleaner case by fully inserting the clip.
- Make sure there are no pinched or restricted areas on air breather hose caused by bending or winding when installing it.