LH&RH Front Window Anti-Pinch

POWER SUPPLY AND GROUND CIRCUIT


FRONT POWER WINDOW SWITCH : Diagnosis Procedure

Regarding Wiring Diagram information, Front Power Window Switch.
1. CHECK POWER SUPPLY CIRCUIT





Check voltage between power window and door lock/unlock switch
RH connector D105 terminal 10 and ground.





Is the inspection result normal?
YES - GO TO 3
NO - GO TO 2
2. CHECK HARNESS CONTINUITY





1. Turn ignition switch OFF.
2. Disconnect BCM connector M16 and power window and door lock/unlock switch RH connector.
3. Check continuity between BCM connector M16 (A) terminal 2 and power window and door lock/unlock switch RH connector
D105 (B) terminal 10.





4. Check continuity between BCM connector M16 (A) terminal 2 and ground.





Is the inspection result normal?
YES - Replace BCM. Body Control System.
NO - Repair or replace harness or connectors.
3. CHECK GROUND CIRCUIT





1. Turn ignition switch OFF.
2. Disconnect power window and door lock/unlock switch RH.
3. Check continuity between power window and door lock/unlock switch RH connector D105 terminal 11 and ground.





Is the inspection result normal?
YES - Inspection End.
NO - Repair or replace harness or connectors.