Front And Rear Window Anti-Pinch

POWER SUPPLY AND GROUND CIRCUIT


REAR POWER WINDOW SWITCH : Diagnosis Procedure

Regarding Wiring Diagram information, Power Window Main Switch.
1. CHECK POWER SUPPLY CIRCUIT





Check voltage between rear power window switch connector terminal 10 and ground.





Is the inspection result normal?
YES - GO TO 3
NO - GO TO 2
2. CHECK HARNESS CONTINUITY





1. Turn ignition switch OFF.
2. Disconnect BCM connector M16 and rear power window switch connector.
3. Check continuity between BCM connector M16 (A) terminal 2 and rear power window switch connector (B) terminal 10.





4. Check continuity between BCM connector M16 (A) terminal 2 and ground.





Is the inspection result normal?
YES - Replace BCM. Body Control System.
NO - Repair or replace harness or connectors.
3. CHECK GROUND CIRCUIT





1. Turn ignition switch OFF.
2. Disconnect rear power window switch connector.
3. Check continuity between rear power window switch connector terminal 11 and ground.





Is the inspection result normal?
YES - Inspection End.
NO - Repair or replace harness or connectors.