Removal And Installation

AIR CLEANER AND AIR DUCT


Removal and Installation


REMOVAL
1. Remove the engine room cover.
2. Remove the air duct (inlet).
3. Remove the air cleaner filter from the air cleaner case. Service and Repair.
4. Remove the air duct [between air duct (inlet) and air cleaner case] from the air cleaner case.
5. Remove the PCV hose.
6. Remove the air duct (between air cleaner case and electric throttle control actuator).
- Add marks as necessary for easier installation.
7. Remove air cleaner case with the following procedure.
a. Remove battery. How to Handle Battery.
b. Disconnect the brake fluid level sensor.
c. Disconnect and remove the ECM.
d. Disconnect harness connector from mass air flow sensor.
e. Remove the air cleaner case.
8. Remove the mass air flow sensor from the air cleaner case, as necessary.

CAUTION:
Handle the mass air flow sensor with care:
- Do not shock it.
- Do not disassemble it.
- Do not touch the internal sensor.

INSTALLATION
Installation is in the reverse order of removal.
- Align marks.
- Attach each joint securely.
- Screw clamps firmly.