Cannot Be Changed To Manual Mode

TROUBLE DIAGNOSIS FOR SYMPTOMS


Cannot Be Changed to Manual Mode


SYMPTOM:
Does not change to manual mode when manual shift gate is used.

DIAGNOSTIC PROCEDURE
1.CHECK SELF-DIAGNOSTIC RESULTS
Perform self-diagnosis check. CONSULT-III Function (Transmission) .
Is any malfunction detected by self-diagnosis?
YES - Check the malfunctioning system. CONSULT-III Function (Transmission) .
NO - GO TO 2.
2.CHECK MANUAL MODE SWITCH
Check the manual mode switch circuit. P0826.
OK or NG
OK - GO TO 3.
NG - Repair or replace damaged parts.
3.SYMPTOM CHECK
Check again. Cruise Test .
OK or NG
OK - INSPECTION END
NG - GO TO 4.
4.CHECK TCM
1. Check TCM input/output signals. TCM Input/Output Signal Reference Value .
2. If NG, re-check TCM pin terminals for damage or loose connection with harness connector.
OK or NG
OK - INSPECTION END
NG - Repair or replace damaged parts.