Large Shock "N" To "R" Position

TROUBLE DIAGNOSIS FOR SYMPTOMS


Large Shock "N" to "R" Position


SYMPTOM:
There is large shock when shifting from "N" to "R" position.

DIAGNOSTIC PROCEDURE
1.CHECK SELF-DIAGNOSTIC RESULTS
Perform self-diagnosis check. CONSULT-III Function (Transmission).
Is any malfunction detected by self-diagnosis?
YES - Check the malfunctioning system. CONSULT-III Function (Transmission).
NO - GO TO 2.
2.CHECK ENGINE IDLE SPEED
Check the engine idle speed. For California.
OK or NG
OK - GO TO 3.
NG - Repair.
3.CHECK CVT FLUID LEVEL
Check CVT fluid level. Checking CVT Fluid.
OK or NG
OK - GO TO 4.
NG - Refill CVT fluid.
4.CHECK LINE PRESSURE
Check line pressure at idle. Inspections Before Trouble Diagnosis.
OK or NG
OK - GO TO 5.
NG - Check the malfunctioning item. Inspections Before Trouble Diagnosis.
5.SYMPTOM CHECK
Check again. Check At Idle.
OK or NG
OK - INSPECTION END
NG - GO TO 6.
6.CHECK TCM
1. Check TCM input/output signals. TCM Input/Output Signal Reference Value.
2. If NG, re-check TCM pin terminals for damage or loose connection with harness connector.
OK or NG
OK - Replace the transaxle assembly. Removal and Installation.
NG - Repair or replace damaged parts.