Body - Trunk Clip Missing Or Not Flush With Fender
Classification: BT11-038Reference: NTB11-102
Date: November 18, 2011
2007-2012 SENTRA; TRUNK HINGE CLIP MISSING, OR TRUNK NOT FLUSH WITH FENDER
APPLIED VEHICLES: 2007-2012 Sentra (B16)
IF YOU CONFIRM
That the Trunk Lid is not level with the fender, or that the fit between the lid and the number is incorrect.
or
That one or both of the Stopper Clips are missing, or out of position.
ACTION
1. Remove both Trunk Lid Stopper Clips (refer to procedure)
^ If one or both of the clips are missing, replace as needed.
2. Apply "Locate adhesive between the Stopper Clips and hinges.
3. Reattach the clips and Hold in place until adhesive sets.
^ The above applies for both RH and LH Stopper Clips.
* Adhesive *"Locate Quick gel super glue"
IMPORTANT
The purpose of ACTIONS (above) is to give you a quick idea of the work you will performing. You MUST closely follow the entire SERVICE PROCEDURE as it contains information that is essential to successfully completing this repair.
PARTS INFORMATION
SERVICE PROCEDURE