Rear Door Lock

REAR DOOR LOCK


Removal and Installation


REMOVAL
1. Remove the partition glass. Removal and Installation.
2. Support door glass while lifting it up to the door window completely closed position.





3. Remove the door side grommet, and the outside handle escutcheon screw.





4. Pull the outside handle forward while removing outside handle escutcheon.





5. Pull outside door handle forward and slide it toward the rear of the vehicle to remove.





6. Remove the front and rear gaskets.





7. Remove the door lock assembly screws.

Torque : 5.8 N.m (0.6 kg-m, 51.4 in-lb)






8. Slide the outside handle bracket toward the rear of vehicle, remove the outside handle bracket and the door lock assembly.
9. If equipped, disconnect the door lock assembly electrical connector.





10. Disconnect the outside handle cable from the outside handle bracket.

INSTALLATION
Installation is in the reverse order of removal.