Diagnosis Procedure 3

NATS(NISSAN ANTI-THEFT SYSTEM)


Diagnosis Procedure 3

Self-diagnostic results:
"ID DISCORD, IMM-ECM" displayed on CONSULT-III screen
1.CONFIRM SELF-DIAGNOSTIC RESULTS
Confirm SELF-DIAGNOSTIC RESULTS "ID DISCORD, IMM-ECM" displayed on CONSULT-III screen.

NOTE:
"ID DISCORD IMM-ECM":
Registered ID of BCM is in discord with that of ECM.
Is CONSULT-III screen displayed as shown above [P1611]?
YES - GO TO 2.
NO - GO TO Trouble Diagnosis.
2.PERFORM INITIALIZATION WITH CONSULT-III
Perform initialization with CONSULT-III. Re-register all NATS ignition key IDs.
For initialization, refer to "CONSULT-III Operation Manual".

NOTE:
If the initialization is not completed or malfunctions, CONSULT-III shows message on the screen [INITIALIZATION FAIL].
Can the system be initialized?
YES - Start engine. (END)
- (System initialization had not been completed.)
NO - ECM is malfunctioning.
- Replace ECM.
- Perform initialization with CONSULT-III
For initialization, refer to "CONSULT-III Operation Manual"