Changing M/T Oil

M/T OIL


Changing M/T Oil


DRAINING
1. Start engine and let it run to warm up transaxle.





2. Stop engine. Remove transaxle drain plug and drain oil.
3. Set a gasket on drain plug and install it to transaxle. Tighten drain plug to the specified torque. Disassembly And Assembly.

CAUTION:
Do not reuse gasket.

FILLING





1. Remove plug (1). Fill the transaxle with new oil and check the oil level (L) using suitable gauge (A) as shown.






2. Set an O-ring on plug (1) and then install it to transaxle. Tighten to the specified torque. Disassembly And Assembly.

CAUTION:
Do not reuse O-ring.