Diagnosis Procedure 3

NATS (NISSAN ANTI-THEFT SYSTEM)


Diagnosis Procedure 3

Self-diagnostic results:
"ID DISCORD, IMM-ECM" displayed on CONSULT-III screen
1.CONFIRM SELF-DIAGNOSTIC RESULTS
Confirm SELF-DIAGNOSTIC RESULTS "ID DISCORD, IMM-ECM" displayed on CONSULT-III screen.

NOTE:
"ID DISCORD IMM-ECM":
Registered ID of BCM is in discord with that of ECM.
Is "ID DISCORD IMM-ECM" displayed?
Yes - GO TO 2
No - GO TO Trouble Diagnosis .
2.PERFORM INITIALIZATION WITH CONSULT-III
Perform initialization with CONSULT-III. Re-register all NATS ignition key IDs.
For initialization, refer to "CONSULT-III Operation Manual NATS".

NOTE:
If the initialization is not completed or malfunctions, CONSULT-III shows message on the screen.
Can the system be initialized?
Yes - . Start engine. (END)
- (System initialization had not been completed.)
No - ECM is malfunctioning.
- Replace ECM.
- Perform initialization with CONSULT-III
For initialization, refer to "CONSULT-III Operation Manual NATS"