Removal And Installation - Sedan

REAR BUMPER


Removal and Installation - Sedan


REMOVAL
1. Open trunk lid.
2. Remove rear combination lamp RH/LH. Service and Repair.
3. Remove rear bumper fascia spring nuts and screws RH/LH.
4. Remove rear fender protector. Removal And Installation.
5. Pull the rear bumper fascia side outward and release the bumper side bracket.
6. Remove rear bumper fascia upper clips and screws.





7. Release rear bumper upper retainer (1), then pull rear bumper fascia outward away from rear of vehicle.
8. Release the clips and remove the rear bumper corner finisher and finisher end (if equipped).
9. Remove energy absorbing foam and rear bumper reinforcement.
10. Remove the bumper side bracket (1) RH/LH.





- Arrow Indicates Vehicle Front

INSTALLATION
Installation is in the reverse order of removal.