Radiator Support: Service and Repair

BODY REPAIR


Replacement Operation - RADIATOR CORE SUPPORT

- Work after radiator core support upper and lower bolt on crossmembers have been removed.















RADIATOR CORE SUPPORT


Removal and Installation












REMOVAL

Radiator Core Support Upper
1. Remove the air duct. Removal And Installation .
2. Remove the headlamp (LH/RH). Removal and Replacement .
3. Remove the hood lock assembly, and remove hood lock cable. Service and Repair .
4. Remove the air guide and hood lock cable clip.
5. Remove the washer tank inlet. Service and Repair .
6. Remove the radiator core support upper.

Radiator Core Support Lower
1. Remove the air duct. Removal And Installation .
2. Remove the front bumper. Service and Repair .
3. Remove the headlamp (LH/RH). Removal and Replacement .
4. Remove the hood lock assembly, and remove hood lock cable. Service and Repair .
5. Remove the air guide and hood lock cable mounting clip.
6. Remove the front bumper reinforcement. Service and Repair .
7. Remove the radiator core lower stay.

24.5 N.m (2.5 kg-m, 18 ft-lb)

8. Remove the undercover.





9. Remove radiator core support lower side stay.

55.0 N.m (5.6 kg-m, 41 ft-lb)






10. Tie a cord to all radiator core upper supports of the radiator and condenser.

NOTE:
To prevent the condensor and radiator from being dropped when the radiator core lower support is removed.
11. Remove the bolts, and lower radiator core lower supports.
12. Remove the radiator core lower supports.

INSTALLATION
Installation is in the reverse order of removal.