Removal and Installation

WATER PUMP


Removal and Installation


REMOVAL
1. Drain engine coolant from radiator. Changing Engine Coolant.

CAUTION:
- Perform this step when the engine is cold.
- Never spill engine coolant on drive belts.
2. Partially remove front fender protector (RH). Removal And Installation.
3. Loosen mounting bolts of water pump pulley before loosening belt tension of drive belt.
4. Remove drive belt. Removal and Replacement.
5. Remove water pump pulley.





6. Remove water pump.
- Loosen mounting bolts in reverse order as shown.
- Engine coolant will leak from cylinder block, so have a receptacle ready below.

CAUTION:
- Handle water pump vane so that it does not contact any other parts.
- Water pump cannot be disassembled and should be replaced as a unit.

INSTALLATION
Installation is in the reverse order of removal.

Water pump.





- Tighten bolts in numerical order as shown.

Water pump pulley.

CAUTION:





Never install mounting bolts (A) to oblong holes (B).
- Water pump pulley (1)