Diagnosis Procedure

MALFUNCTION INDICATOR LAMP


Description






The Malfunction Indicator Lamp (MIL) is located on the combination meter.
The MIL will light up when the ignition switch is turned ON without the engine running. This is a bulb check.
When the engine is started, the MIL should go off. If the MIL remains on, the on board diagnostic system has detected an engine system malfunction.
For details, Diagnosis Description.





MALFUNCTION INDICATOR LAMP


Diagnosis Procedure

1.CHECK DTC
Check that DTC UXXXX is not displayed.
Is the inspection result normal?
YES - GO TO 2.
NO - Perform trouble diagnosis for DTC UXXXX.
2.CHECK DTC WITH METER
Meter/M&A.
Is the inspection result normal?
YES - GO TO 3.
NO - Repair or replace.
3.CHECK INTERMITTENT INCIDENT
Trouble Diagnosis For Intermittent Incident.
Is the inspection result normal?
YES - Replace combination meter.
NO - Repair or replace.