Removal And Installation

AIR CLEANER AND AIR DUCT


Removal and Installation


REMOVAL
1. Remove the battery. Removal and Replacement.
2. Remove the air duct (inlet).
3. Remove the air cleaner filter from the air cleaner case. Service and Repair.
4. Remove the air duct [between air duct (inlet) and air cleaner case] from the air cleaner case.
5. Remove the PCV hose.
6. Remove the air duct (between air cleaner case and electric throttle control actuator).
- Add marks as necessary for easier installation.
7. Disconnect harness connector from mass air flow sensor.
8. Remove air cleaner case.
9. Remove the mass air flow sensor from the air cleaner case, if necessary.

CAUTION:
- Handle mass air flow sensor carefully and avoid impacts.
- Never touch sensor part.

INSTALLATION
Installation is in the reverse order of removal.
- Align marks. Attach each joint. Screw clamps firmly.