Diagnosis Procedure

SHIFT POSITION INDICATOR CIRCUIT


Diagnosis Procedure

1.CHECK INPUT SIGNALS
With CONSULT-III
1. Start engine.
2. Select "MAIN SIGNALS" in "DATA MONITOR" mode for "TRANSMISSION" with CONSULT-III and read out the value of "SLCT LVR POSI".
3. Check that the following three positions or indicators are same.
- Actual position of the selector lever
- "SLCT LVR POSI" on CONSULT-III screen
- Shift position indicator in the combination meter
OK or NG
OK - INSPECTION END
NG - Check the following.

SHIFT POSITION INDICATOR SYMPTOM CHART