Yaw Rate Sensor: Service and Repair

G SENSOR


Removal and Installation


EXPLODED VIEW











REMOVAL
1. Disconnect battery negative terminal.
2. Remove driver seat. Removal and Installation.
3. Partially remove and reposition carpet from driver seat area. Service and Repair.





4. Disconnect harness connector (A).
5. Remove attaching nuts (B) and remove yaw rate/side/decel G sensor (1).

CAUTION:
- Do not drop or strike the yaw rate/side/decel G sensor.
- Do not use power tools to remove or install yaw rate/side/decel G sensor.

INSTALLATION
Installation is in the reverse order of removal.

CAUTION:
- Do not drop or strike the yaw rate/side/decel G sensor.