Output Speed Sensor

ON-VEHICLE SERVICE


Output Speed Sensor


COMPONENTS











REMOVAL AND INSTALLATION

Removal
1. Disconnect the battery negative terminal.
2. Remove air duct (inlet), air duct and air cleaner case. .





3. Remove gusset (1).





4. Disconnect output speed sensor harness connector.
5. Remove clip (A).
6. Remove output speed sensor (1) from A/T.

Arrow Indicates Bolt

7. Remove O-ring from output speed sensor (1)

Installation
Installation is in the reverse order of removal.

CAUTION:
- Do not reuse O-ring.
- Apply ATF to O-ring.





- Ensure output speed sensor harness is firmly secured with bolt.
(1): Output speed sensor

Arrow Indicates Bolt