Seals and Gaskets: Service and Repair

SIDE OIL SEAL


Removal and Installation


REMOVAL
1. Remove front drive shafts from transaxle assembly. Removal and Installation (Left Side) and Removal and Installation (Right Side).





2. Remove differential side oil seal (1) using suitable tool.

CAUTION:
Do not damage transaxle case or clutch housing.

INSTALLATION





Installation is in the reverse order of removal.
- Install differential side oil seal (1) to clutch housing and transaxle case, using Tool.






CAUTION:
- Do not reuse differential side oil seal.
- When installing, do not incline differential side oil seal.
- Do not damage clutch housing or transaxle case.
- Check oil level and oil leakage after installation. Inspection.