Rear Door: Adjustments

DOOR


Fitting Adjustment












FRONT DOOR

Longitudinal Clearance at Front End
Access from inside the fender to loosen the hinge bolts. Raise the front door at rear end to adjust.

Surface Height Adjustment
Loosen the front door bolts, and adjust the surface height difference of fender and front door according to the fitting standard dimension.

Striker Adjustment






16.7 N.m (1.7 kg-m, 12 ft-lb)

REAR DOOR

Longitudinal Clearance and Surface Height Adjustment at Front End





1. Remove the center pillar upper and lower garnishes. Component.
2. Access from inside the vehicle to loosen the hinge nuts. Open the rear door, and raise the rear door at rear end to adjust.

Surface Height Adjustment
Loosen the front door striker bolts and rear door hinge nuts, and adjust the surface height difference of front and rear doors according to the fitting standard dimension.

Striker Adjustment

16.7 N.m (1.7 kg-m, 12 ft-lb)

BACK DOOR

Longitudinal Clearance and Surface Height Adjustment










1. Open and support the back door.
2. Slightly loosen the hinge nuts.
3. Reposition the door as necessary and tighten the nuts.
4. Confirm the adjustment. Repeat as necessary to obtain the desired fit.

Striker Adjustment

20 N.m (2.2 kg-m, 16 ft-lb)