Rear Combination Lamp

REAR COMBINATION LAMP


Removal and Installation


HATCHBACK

CAUTION:
It is not necessary to remove the luggage side finisher. Doing so may render the part damaged or unusable.

Removal





1. Remove the access panels using suitable tool.
2. Remove rear combination lamp nuts.
3. Pull the rear combination lamp toward rear of the vehicle and remove from the vehicle.
4. Disconnect rear combination lamp connector, and remove rear combination lamp.

Installation
Installation is in the reverse order of removal.

SEDAN

Removal
1. Remove trunk side finisher. Service and Repair.





2. Remove the rear combination lamp nuts (1).
3. Remove the rear combination lamp (2).
4. Remove the rear combination lamp seal (3).

Installation
Installation is in the reverse order of removal.