Rear Combination Lamp

REAR COMBINATION LAMP


Bulb Replacement


HATCHBACK

CAUTION:
It is not necessary to remove the luggage side finisher, Doing so may render the part damaged or unusable.
1. Remove the rear combination lamp. Service and Repair.
2. Turn bulb socket counterclockwise and unlock it.
3. Remove bulb.
4. Installation is in the reverse order of removal.

SEDAN
1. Remove trunk side finisher. .





2. Turn bulb socket counterclockwise and unlock it.
3. Remove the stop/tail lamp bulb (1), turn signal lamp bulb (2), and the back-up lamp bulb (3).
4. Installation is in the reverse order of removal.