Headlamp High Beam Does Not Illuminate (One Side)

HEADLAMP (FOR USA)


Headlamp High Beam Does Not Illuminate (One Side)

1.HEADLAMP HIGH BEAM FUSE INSPECTION
Inspect 10A fuse No. 34 (RH) or fuse No. 35 (LH).
OK or NG
OK - GO TO 2.
NG - Repair harness.
2.CHECK BULB
Check headlamp bulb which does not illuminate.
OK or NG
OK - GO TO 3.
NG - Replace bulb. Service and Repair .
3.CHECK HEADLAMP INPUT SIGNAL
1. Turn ignition switch OFF.
2. Disconnect headlamp connector.
3. Lighting switch is turned to HIGH position.





4. Check voltage between headlamp harness connector and ground.





OK or NG
OK - GO TO 4.
NG - GO TO 5.
4.CHECK HEADLAMP GROUND CIRCUIT
1. Turn ignition switch OFF.





2. Check continuity between headlamp harness connector and ground.





OK or NG
OK - Check connecting condition headlamp harness connector.
NG - Repair harness or connector.
5.CHECK HEADLAMP CIRCUIT
1. Turn ignition switch OFF.
2. Disconnect IPDM E/R connector.





3. Check continuity between IPDM E/R harness connector (A) and headlamp harness connector (B).





OK or NG
OK - Replace IPDM E/R. Inspection with CONSULT-III (Self-Diagnosis) Service and Repair .
NG - Repair harness or connector.