Vehicle Does Not Creep Forward In "D" Or "L" Position

TROUBLE DIAGNOSIS FOR SYMPTOMS


Vehicle Does Not Creep Forward in "D" or "L" Position


SYMPTOM:
Vehicle does not creep forward when selecting "D" or "L" position.

DIAGNOSTIC PROCEDURE
1.CHECK SELF-DIAGNOSTIC RESULTS
Perform self-diagnosis check. CONSULT-III Function (Transmission) .
Is any malfunction detected by self-diagnosis?
YES - Check the malfunctioning system. CONSULT-III Function (Transmission) .
NO - GO TO 2.
2.CHECK CVT POSITION
Check CVT position. Testing and Inspection
OK or NG
OK - GO TO 3.
NG - Adjust CVT position. Adjustments .
3.CHECK CVT FLUID LEVEL
Check CVT fluid level. Checking CVT Fluid .
OK or NG
OK - GO TO 4.
NG - Refill CVT fluid.
4.CHECK LINE PRESSURE
Check line pressure at idle. Inspections Before Trouble Diagnosis .
OK or NG
OK - GO TO 5.
NG - Check the malfunctioning item. Inspections Before Trouble Diagnosis .
5.CHECK STALL REVOLUTION
Check stall revolution. Inspections Before Trouble Diagnosis .
OK or NG
OK - GO TO 6.
NG - Check the malfunctioning item. Inspections Before Trouble Diagnosis .
6.CHECK SYMPTOM
Check again. Check At Idle .
OK or NG
OK - INSPECTION END
NG - GO TO 7.
7.CHECK TCM
1. Check TCM input/output signals. TCM Terminal And Reference Value .
2. If NG, re-check TCM pin terminals for damage or loose connection with harness connector.
OK or NG
OK - Replace the transaxle assembly. Transaxle Assembly .
NG - Repair or replace damaged parts.