Side Oil Seal

SIDE OIL SEAL


Removal and Installation


REMOVAL
1. Remove front drive shafts from transaxle assembly. Removal and Installation (Left Side) and Removal and Installation (Right Side).





2. Remove differential side oil seal (1) using a suitable tool.

CAUTION:
Be careful not to damage transaxle case and clutch housing.

INSTALLATION





Installation is in the reverse order of removal.
- Install differential side oil seal (1) to clutch housing and transaxle case using Tool.

CAUTION:
Do not reuse oil seal.

Tool number : KV32500QAA (B.vi 1666-B)

- A: Transaxle case side
- B: Clutch housing side






CAUTION:
- Never reuse differential oil seal
- Never incline differential oil seal.
- Never damage clutch housing and transaxle case.
- Check oil level after installation. Checking M/T Oil.