Front Wiper Does Not Stop

FRONT WIPER AND WASHER SYSTEM


Front Wiper Does Not Stop

1.CHECK CIRCUIT BETWEEN COMBINATION SWITCH AND BCM
With CONSULT-III
1. Select "BCM" on CONSULT-III, and select "WIPER" on "SELECT TEST ITEM" screen.
2. Select "DATA MONITOR" on "SELECT DIAG MODE" screen. Make sure that "FR WIPER INT", "FR
WIPER LOW", "FR WIPER HI", and "FR WASHER SW" turn ON-OFF according to front wiper switch operation.
Without CONSULT-III
Combination Switch Inspection .
OK or NG
OK - Replace IPDM E/R. Initial Inspection and Diagnostic Overview .
NG - Check combination switch (wiper switch). Combination Switch Inspection .