Front Wiper Intermittent Operation Switch Position Cannot Be Adjusted

FRONT WIPER AND WASHER SYSTEM


Front Wiper Intermittent Operation Switch Position Cannot Be Adjusted

1.CHECK CIRCUIT BETWEEN COMBINATION SWITCH AND BCM
With CONSULT-III
1. Select "BCM" on CONSULT-III, and select "WIPER" on "SELECT TEST ITEM" screen.
2. Select "DATA MONITOR" on "SELECT DIAG MODE" screen. Make sure that "INT VOLUME", changes in order from 1 to 7 according to wiper switch operation.
Without CONSULT-III
Combination Switch Inspection .
OK or NG
OK - Replace BCM. Service and Repair .
NG - Check combination switch (wiper switch). Combination Switch Inspection .