B177B

B177B ROOF STATUS INCORRECT





DTC Logic

DTC DETECTION LOGIC

NOTE:
If two or more DTCs are detected, Soft Top Control Unit, and determine trouble diagnosis order.






DTC CONFIRMATION PROCEDURE
1.ADJUST SOFT TOP POSITION
1. Turn ignition switch OFF and wait at least 4 minutes.
2. Manually operate soft top to fully open.
- GO TO 2.
2.PERFORM DTC CONFIRMATION PROCEDURE
1. Start engine.
2. Operate soft top to fully open and fully close.
3. Select "Self Diagnostic Result" mode of "CONVERTIBLE ROOF" using CONSULT-III.
4. Check DTC.
Is DTC detected?
YES - Go to SEE Diagnosis Procedure.
NO - INSPECTION END




Diagnosis Procedure
1.PERFORM DTC CONFIRMATION PROCEDURE
Perform DTC Confirmation Procedure. SEE DTC Logic.
Is the DTC displayed again?
YES - Replace soft top control unit. Removal And Installation.
NO - INSPECTION END