Symptom Related Diagnostic Procedures
MULTI AV SYSTEM SYMPTOMS
Symptom Table
RELATED TO NAVIGATION
Trouble Diagnosis Chart by Symptom
RELATED TO HANDS-FREE PHONE
- Check that the cellular phone is a corresponding type (Bluetooth(TM) correspondence) when the hands-free related malfunction vehicle is in service before performing a diagnosis.
- There is a case that malfunction occurs due to the version change of the phone type, etc. even though it is a corresponding type. Therefore, confirm it by changing the cellular phone to another corresponding type phone, and check that it operates normally. It is necessary to distinguish whether the cause is the vehicle or cellular phone.
Simple Check for Bluetooth(TM) Communication
If cellular phone and AV control unit cannot be connected with Bluetooth(TM) communication, the following procedure allows the technician to judge which device has a malfunction.
1. Turn on the cellular phone, not connecting Bluetooth(TM) communication.
2. Start CONSULT-III, then start Windows(R).
3. Set CONSULT-III near the cellular phone.
4. When operating Bluetooth(TM) registration by cellular phone, check if CONSULT-III* is displayed on the device name.
(If another Bluetooth(TM) device is located near the cellular phone, the name of the device will also be displayed.)
NOTE:
*:Displayed device name is "NISSAN- ********".
- If no device name is displayed, cellular phone is malfunctioning.
Repair the cellular phone first, then perform diagnosis.
- If CONSULT-III is displayed on device name, cellular phone is normal. Perform diagnosis as per the following table.
Trouble Diagnosis Chart by Symptom
RELATED TO RGB IMAGE
Trouble Diagnosis Chart by Symptom
RELATED TO VOICE CONTROL
Trouble Diagnosis Chart by Symptom
RELATED TO AUDIO
RELATED TO USB
NOTE:
Check that there is no malfunction of USB equipment main body before performing a diagnosis.
Trouble Diagnosis Chart by Symptom
RELATED TO DVD MODE
RELATED TO CAMERA
RELATED TO STEERING SWITCH
Trouble Diagnosis Chart by Symptom
RELATED TO AUXILIARY INPUT
NOTE:
Check that there is no malfunction of AUX equipment main body before performing a diagnosis.