Removal And Installation Roadster

TRUNK LID LOCK


TRUNK LID LOCK : Removal and Installation


REMOVAL
1. Remove trunk lid weather-strip. Removal And Installation Roadster.
2. Remove trunk lid rear plate. Trunk Rear Plate.
3. Remove bolts from trunk lid opener cable.
4. Remove mounting nuts, and then remove trunk lid lock assembly.
5. Disconnect trunk lid opener actuator connector.
6. Using a flat-bladed screwdriver disconnect trunk lid opener cable from trunk lid lock assembly.
7. Remove trunk lid side finisher. Trunk Side Finisher.
8. Remove rear parcel shelf finisher assembly. Rear Parcel Shelf Finisher Assembly, "REAR PARCEL SHELF FINISHER
ASSEMBLY : Removal and Installation".
9. Remove bolts, and then remove trunk lid opener key cylinder cover.
10. Remove bolts, and then remove trunk lid opener key cylinder assembly.
11. Remove bolts, and then remove trunk lid opener key cylinder from trunk lid opener key cylinder bracket.
12. Disconnect trunk lid opener cable from trunk lid opener key cylinder.
13. Remove storage room finisher. Storage Room Finisher.
14. Remove rear speaker. Removal And Installation Bose Audio Without Navigation. (with rear speaker)





15. Remove mounting bolts (A), and then remove side parcel shelf cover LH (1). (without rear speaker)
16. Disconnect clips, and then remove trunk lid opener cable.

INSTALLATION
Install in the reverse order of removal.

CAUTION:
After installation, check back door open/close, lock/unlock operation.