Assembly

FUEL LEVEL SENSOR UNIT, FUEL FILTER AND FUEL PUMP ASSEMBLY


Assembly


CAUTION:
Sub fuel level sensor unit cannot be disassembled and should be replaced as a unit.
1. Check for damage of main fuel level sensor unit installation position on the side of fuel filter and fuel pump assembly.
2. Slide main fuel level sensor unit until it aligns to installation groove, then insert it until it stops.
- After inserting, apply force in reverse direction (removal direction) to ensure it cannot be pulled out.





3. Connect the white (A), black (B), and red (C) harnesses so that they are in the positions shown in the figure.
- Securely insert harness connector until it stops.