Seat Belt Warning Lamp Does Not Turn ON

SEAT BELT WARNING LAMP DOES NOT TURN ON





Diagnosis Procedure
1.CHECK SELF DIAGNOSIS RESULT
Perform "COMBINATION METER" self diagnostic result. CONSULT-III Function (Meter/ M & A), "CONSULT-III Function (METER/ M&A)"
Is DTC detected?
YES - Repair or replace the malfunctioning parts.
NO - GO TO 2.
2.CHECK POWER SUPPLY
Check that fuses are not blown.
Check ignition power supply of combination meter. Combination Meter
Is the inspection result normal?
YES - GO TO 3.
NO - Repair or replace the malfunctioning parts.
3.CHECK SEAT BELT BUCKLE SWITCH CIRCUIT (DRIVER SIDE)
Check seat belt buckle switch circuit (driver side). Driver Side
Is the inspection result normal?
YES - GO TO 4.
NO - Repair or replace the malfunctioning parts.
4. .CHECK SEAT BELT BUCKLE SWITCH CIRCUIT (PASSENGER SIDE)
Check seat belt buckle switch circuit (passenger side). Passenger Side

NOTE:
Except for Mexico
Is the inspection result normal?
YES - GO TO 5.
NO - Repair or replace the malfunctioning parts.
5. .CHECK SEAT BELT WARNING LAMP CIRCUIT
Check seat belt warning lamp circuit. Seat Belt Warning Lamp Circuit
Is the inspection result normal?
YES - GO TO 6.
NO - Repair or replace the malfunctioning parts.
6.CONFIRM THE OPERATION
Confirm the operation again.
Is the inspection result normal?
YES - Check intermittent incident. Intermittent Incident Regular Grade.
NO - GO TO 1.