Torque & Sequence

INTAKE MANIFOLD COLLECTOR



Intake manifold collector 19.6 N.m (2 kg-m, 14 ft-lb)



If stud bolts were removed, install them and tighten to the torque specified below.









Arrow Indicates Engine front

Tighten mounting bolts and nuts in numerical order as shown in the figure.


INTAKE MANIFOLD



If stud bolts were removed, install them and tighten to the torque specified below.






Tighten all mounting bolts to the specified torque in two or more steps in numerical order as shown in the figure.




Arrow Indicates Engine Front

Tighten all mounting bolts to the specified torque in two or more steps in numerical order as shown in the figure.

CAUTION:
Install intake manifold with the marks (put on the intake manifold and the cylinder head before removal) aligned.