Hazard Function

HAZARD FUNCTION





Description
Perform answer-back for each operation with number of blinks.




Component Function Check
1.CHECK FUNCTION
Check hazard warning lamp ("FLASHER") in Active Test.
Is the inspection result normal?
YES - Hazard warning lamp circuit is OK.
NO - SEE Diagnosis Procedure.




Diagnosis Procedure
1.CHECK HAZARD SWITCH CIRCUIT
Operate the hazard lights by turning ON the hazard warning switch.
Is the inspection result normal?
YES - GO TO 2
NO - Repair or replace hazard warning switch circuit. [1][2]Electrical Diagrams.
2.CHECK INTERMITTENT INCIDENT
Intermittent Incident.
- Inspection End.