Trunk Lid

TRUNK LID


TRUNK LID ASSEMBLY : Removal and Installation


REMOVAL
1. Remove the license lamp finisher. Service and Repair.
2. Remove the rear spoiler. Service and Repair.
3. Disconnect the connectors in the trunk lid, and remove the harness clips and pull the harness out of the trunk lid.
4. Remove the hinge to trunk lid bolts and the trunk lid assembly.

INSTALLATION
Installation is in the reverse order of removal.

CAUTION:
- After installing, apply touch-up paint (the body color) onto the head of the hinge bolts.
- After installing, check operation.
- After installing, perform fitting adjustment. Adjustments.