Air Door: Service and Repair

AIR MIX DOOR MOTOR


Removal and Installation


NOTE:
The illustrations are shown with the heater and cooling unit assembly out of the vehicle for clarity.

AIR MIX DOOR MOTOR - LH

Removal
1. Remove the instrument lower cover LH. Removal And Installation Instrument Panel.
2. Remove the console side finisher LH. Removal And Installation Instrument Panel.





3. Remove the heater and cooling unit foot duct LH (2).
4. Remove the tire pressure (monitoring system) receiver. Service and Repair.
5. Disconnect the air mix door motor connector (1).
6. Remove the air mix door motor screws (A) and the air mix door motor LH.

Installation
Installation is in the reverse order of removal.

AIR MIX DOOR MOTOR - RH

Removal
1. Remove the glove box. Removal And Installation Instrument Panel.
2. Remove the console side finisher RH. Removal And Installation Instrument Panel.





3. Remove the heater and cooling unit foot duct RH (2).
4. Disconnect the air mix door motor connector (1).
5. Remove the air mix door motor screws (A) and the air mix door motor RH.

Installation
Installation is in the reverse order of removal.