Key Slot

KEY SLOT





Diagnosis Procedure
Regarding Wiring Diagram information, NVIS (Nissan Vehicle Immobilizer System-NATS).
1.CHECK KEY SLOT POWER SUPPLY CIRCUIT
1. Place the push-button ignition switch in the OFF position.
2. Disconnect key slot connector.





3. Check voltage between key slot connector M40 and ground.





Is the inspection result normal?
YES - GO TO 2
NO - Repair or replace key slot power supply circuit.
2.CHECK KEY SLOT GROUND CIRCUIT





Check continuity between key slot connector M40 terminal 7 and ground.





Is the inspection result normal?
YES - GO TO 3
NO - Repair or replace key slot ground circuit.
3.CHECK INTERMITTENT INCIDENT
Intermittent Incident.
- Inspection End.