LH Only Window Anti-Pinch

FRONT POWER WINDOW SWITCH


Removal and Installation


REMOVAL





1. Using a suitable tool, release the pawls, then lift upward the power window/door lock switch and finisher (2) - RH as an assembly.
broken circle indicates pawl

CAUTION:
Wrap a cloth around suitable tool to protect components from damage.
2. Disconnect the harness connector.
3. Remove the power window/door lock switch and finisher (2) RH assembly from the front door finisher.
4. Release the four tabs (two on each side) with a suitable tool (A), then separate the power window/door lock switch (1) from the switch finisher (2).
broken circle indicates pawl

CAUTION:
Do not bend back the pawls of the switch finisher too far or breakage will occur.

INSTALLATION
Installation is in the reverse order of removal.