LH&RH Front Window Anti-Pinch

REAR POWER WINDOW SWITCH


Removal and Installation


REMOVAL





1. Using a suitable tool, release the pawls, then lift upward the rear power window switch and finisher (2) as an assembly.
broken circle indicates pawl

CAUTION:
Wrap a cloth around suitable tool to protect components from damage.
2. Disconnect the harness connector.
3. Remove the rear power window switch and finisher (2) assembly from the rear door finisher.
4. Release the tab (one on each side) with a suitable tool (A) , then separate the rear power window switch (1) from the switch finisher (2).
: Pawl

CAUTION:
Do not bend back the pawls of the switch finisher too far or breakage will occur.

INSTALLATION
Installation is in the reverse order of removal.