Entertainment Systems: Description and Operation

SYSTEM


INTEGRATED CONTROL SYSTEM : System Description


SYSTEM DIAGRAM











MULTI DISPLAY UNIT INPUT/OUTPUT SIGNAL
















SYSTEM DESCRIPTION
- The multi display unit receives necessary information for controlling the following functions from the respective units via CAN communication.
- D-MODE function
- Information display/setting
- Air conditioner adjustment function. System.
- The multi display unit transmits the status of user-selected D-MODE (NORMAL, SPORT, or ECO) to the
TCM (CVT models), ECM (M/T models), EPS control unit and A/C auto amp. For the D-MODE functions, System Description.
- TCM transmits to ECM the D-MODE status (NORMAL, SPORT, or ECO) received from the multi display unit
(CVT models).
- ECM (M/T models) and EPS control unit receives the D-MODE status (NORMAL, SPORT, or ECO) from the multi display unit.
- The A/C auto amp. receives the air conditioner switch operation signal, ECO mode signal, and ECO mode switch signal from the multi display unit.
- The multi display unit integrates a diagnosis function that allows a diagnosis by CONSULT-III.

Nissan Dynamic Control System Display/Setting Functions











Engine Torque Gauge





The engine torque gauge displays the engine torque level in 5 grades based on the engine torque signal received from ECM via
CAN communication.
Engine torque gauge display characteristic






Voltmeter





The voltmeter reads the input voltage of the multi display unit and displays the voltage level in 5 grades according to the reading.
Voltmeter display characteristic






Boost Gauge





The boost gauge displays the boost level in 5 grades based on the boost pressure signal received from ECM via CAN communication.
Boost gauge display characteristic






Instantaneous Fuel Consumption





The instantaneous fuel consumption gauge displays the instantaneous fuel consumption in 5 grades, which is calculated from the fuel consumption monitor signal received from ECM via CAN communication and the vehicle speed signal received from the combination meter via CAN communication.
Fuel ECO display characteristic






G-Force





The G-FORCE gauge displays the decel G level and side G level in
3 grades respectively, which are calculated based on the decel G sensor signal and side G sensor signal received from the ABS actuator and electric unit (control unit) via CAN communication.

Drive Information





The travel time, average speed, and mileage are displayed as follows.
- Travel time: Displays the time calculated by the multi display unit.
- Average speed: Calculated from the odometer signal and vehicle speed signal received from the combination meter via CAN communication.
- Mileage: Calculated from the odometer signal and vehicle speed signal received from the combination meter via CAN communication.

ECO Information





The fuel economy record is calculated from the fuel consumption monitor signal received from ECM via CAN communication and the vehicle speed signal received from the combination meter via CAN communication.

Set Up





The following items can be set.
- Display Brightness
- Button Brightness
- Select Language
- Select Units
- Clock Time Setting
- CLIMATE ECO
- Auto Interior Illumination
- Selective Door Unlock
- Auto Headlight Sensitivity

Display/operation restrictions
- To secure safety, some functions are not allowed for user operation during driving.
- The functions subject to the display/operation restriction are as follows.






Driving status judgment criterion
- The driving status is judged from the vehicle speed signal received from the combination meter via CAN communication. The driving status is displayed on the multi display unit and operation restrictions are applied as necessary.