Buzzer (Combination Meter)

BUZZER (COMBINATION METER)





Component Function Check
1.CHECK FUNCTION
1. Select "INTELLIGENT KEY" of "BCM" using CONSULT-III.
2. Select "INSIDE BUZZER" in "ACTIVE TEST" mode.
3. Check that the function operates normally according to the following conditions.





Is the inspection result normal?
Yes - Buzzer (combination meter) is OK.
No - SEE Diagnosis Procedure.




Diagnosis Procedure
1.CHECK METER BUZZER CIRCUIT
Meter Buzzer Circuit.
Is the inspection result normal?
Yes - GO TO 2.
No - Repair or replace the malfunctioning parts.
2.CHECK INTERMITTENT INCIDENT
Intermittent Incident.
- INSPECTION END