IPDM E/R (With I-Key)

IPDM E/R


Removal and Installation


CAUTION:
IPDM E/R integrated relays are not serviceable parts, and must not be removed from the unit.

REMOVAL
1. Remove battery.
2. Press and expand pawls (A) on lateral side of IPDM E/R cover and remove IPDM E/R (1) from IPDM E/R cover B (2).





3. Disconnect the harness connector and then remove the IPDM
E/R.





4. Remove IPDM E/R cover B mounting nuts (A).





5. Insert a flat-bladed screwdriver between IPDM E/R cover A (1) and IPDM E/R cover B (2), disengage pawls, and remove IPDM
E/R cover A.
6. Remove IPDM E/R cover B.

INSTALLATION
Install in the reverse order of removal.